HARDCORE TOYOTA ROCK CRAWLING ARMOR
Shop by Model
Internal Roll Cages
About 4x I
0 item(s) / Total: $0
Shop by Model
10-21 4 Runner
> 2010-2021 4Runner Drivetrain Skid Set
Gen 5 Toyota 4Runner Skid Plate Set
2010-2021 4Runner Drivetrain Skid Set
Front Skid Version
I have 4x I BOLT ON sliders
Add to Cart
Add to Wish List
100% bolt on, no drilling, no welding, no modification required
Available for non KDSS and KDSS compatible front skid
Flat belly skid system
1/4" thick, made in the USA, HD Front and Engine Skid
Full width front and under engine protection also protects A arm mounts
Oil filter and drain plug access ports, no need to remove the skid for oil changes.
Uses factory and included hardware. All included hardware is stainless steel
Transmission skid mounts to trans cross member
Transfer Case Skid has included support structure
Transfer Case Skid held up by bottom of frame
Skid System is fully compatible with 4x Innovations
Bolt On Rock Sliders
***Save $100 when ordering
Bolt on Sliders
and Skid Plate Set together!***
Automatically applied in shopping cart, no coupon needed.
Building on our industry strongest bolt on rock sliders, we are proud to offer this super duty drive-train skid kit for the 5th Gen 4Runners. Like everything here at 4x Innovations we have designed this kit to give you the utmost strength for that easy peace of mind on that new off road adventure.
The first thing you will notice with this great skid kit is the flat, full coverage profile. This skid kit starts at the front of the truck tucking a 1/4" thick steel skid plate up to the bottom of the frame and siting flush with the front of the frame. This allows any bumper that mounts to the front or flat to the bottom of the frame to fit with our front skid. Our front section of the skid is now available in two versions. If you have the KDSS system we've got you covered, or if you don't, we have a high clearance version just for you. Both versions use 1/4" high grade, made in the USA steel as it is the most likely to see high force impacts when offroading. From there the 1/4" thick engine skid bolts to the back edge of the front skid with a full width 1/4" backing plate and to the frame for superior strength. Oil changes are simple to perform with the oil filter and drain plug access ports that are provided in the front and engine skids.
After the engine skid you'll have full frame width coverage for the transmission and transfer cases from 3/16" thick high grade, made in the USA steel. The transmission skid bolts to the back of the engine skid with a full width backing plate, and to the transmission cross member. Internal support ribs provide additional strength to the skid plate. There is clearance for our
bolt on rock slider
mounting bracket set.
The transfer case skid mounts to the back of the transmission skid plate with another backing plate. The transfer case skid is also supported by the frame and bolts to special mounting plates that also help mount out
bolt on rock slider
tying the two together. Additionally internal support member and rear support flange support the transfer case cross member. Relief bucket makes the skid compatible with the stock exhaust.
You can offroad with peace of mind with this premium heavy duty skid plate kit! This kit reuses 6 stock bolts, and includes all new stainless button head and countersink bolts for the remaining needed hardware. Skids are steel and require painting. We recommend POR-15 over powder coat for skid plates.
The front skid is available compatible with the KDSS system or a high clearance version for those without the KDSS system.
03-20 4Runner Rola Rack Mount Kit
1990 - 2021 4 Runner Rock Sliders
2010 - 2021 4Runner Bolt On Rock Slider
Browse Similar Items