HARDCORE TOYOTA ROCK CRAWLING ARMOR
Shop by Model
Internal Roll Cages
About 4x I
0 item(s) / Total: $0
> 84-89 4 Runner Rear Class 2 Hitch Bumper
1984 - 1989 Toyota 4Runner Rear Hitch Bumper
84-89 4 Runner Rear Class 2 Hitch Bumper
Built to fit a BODY Lift
No Body Lift
Fits 1" BODY Lift [+$75.00]
Fits 2" BODY Lift [+$75.00]
Fits 3" BODY Lift [+$75.00]
Tire Carrier Options
Add Swing Out Tire Carrier [+$774.00]
Add Single Jerry Can Mount [+$130.00]
Add Double Jerry Can Mount [+$230.00]
Add HiLift Jack Mount [+$30.00]
Add Fold Down Cook Tray [+$128.00]
Add RotoPax Mount Bracket for up to 2 x 3 gallon packs [+$65.00]
Add to Cart
Add to Wish List
1.75 DOM Certified Tubing
Heavy Duty High Grade Steel Mounting Plates
Includes 2 D-Ring Shackle Mounts
Superior Support with Wrap Around Side Protection
Built-In Class 2 Rated Rear Hitch
Side Protection Covers from Rear Wheel Well on the Driver’s Side to the Rear Wheel Well on the Passengers and also Supported Back to the Frame
Supports and Encapsulates All Main Bumper Tubes
Grade 8 Mounting Hardware Included
Body Lift Modifications Available, contact us for more details.
Ships bare steel, ready to paint with the coating and color of your choice.
Built specifically for the 4 Runner for premium fit. They do NOT fit the 84-88 pickup.
Tire Carrier Features:
Industry's strongest hinge pivot mounted in double shear with high grade 5/16 steel support bracket
Supported by tapered roller bearings used on 1000 pound trailer axles
Massive 3/4 inch grade 8 pivot bolt
Stainless steel inner bearing sleeve to prevent corrosion
Spring loaded pin locks the hinge pivot open at 90 and 115 degrees
Spring pin rides on stainless steel skid pad, no scratches in the paint or corrosion
High strength latch uses 1" solid steel round bar catch pin and high grade steel components
Vibration proof design encloses around over 3/4 of latch pin
Spring pin locks latch closed and open
Nylon washer in latch components for wear resistance
UHMW skid pad for smooth, wear resistant closure
Tire mounts with factory Toyota size lug nuts
Built standard to hold up to 36" tire with 6 7/16" inches from WMS to sidewall surface of tire
Custom tire mounting configurations available upon request
Optional mount for 1 or 2 x 5 gallon NATO Spec Jerry Cans or Scepter Fuel or Water carriers. Please comment in the order comments on the check out page which closure arms you'd like. (cans not included)
Optional RotoPax Mounting location for up to 2 x 3 gallon packs, RotoPax Mount (example Rotopax #DLX Pack Mount) is not included.
Optional 31" x 16" fold down camp cook table made from mild steel, which does require painting.
Optional mount for carrying a Hi Lift Jack on the tire carrier.
All parts ship bare steel, ready to paint with the coating and color of your choice.
For more information about tire carrier options visit this listing
Tire Carrier install guide is available here
One of the most forgotten and neglected, but important, parts of any off road truck is a solid rear bumper. When you wheel your truck, chances are you're going to come across a time when you have to drive down off a ledge or very steep hill. This ledge might want to take a giant bite out of the back side of your rig. The factory bumper also does not provide that heavy duty tow point you need when getting out of sticky situations.
4x Innovation's Rear Tube Bumpers are designed to withstand the hardest of hits and the toughest of tugs. Made from 1.75" DOM steel tubing and heavy gauge mounting plates, they include superior support with 2 D-ring shackle mounts and wrap around side protection that is tied directly to the frame mounts. The built in hitch is rated as a class 2 hitch.
Monstrous high grade steel mounting plates have a 3/4 inch hole for mounting any standard D ring shackle. It also supports and encapsulates all main bumper tubes.
Browse Similar Items
Shop by Model