HARDCORE TOYOTA ROCK CRAWLING ARMOR
Shop by Model
Internal Roll Cages
About 4x I
0 item(s) / Total: $0
> 95.5-04 Reg. Cab. Tacoma Rock Slider
1995.5 - 2004 Toyota Regular Cab Tacoma Off Road Rock Sliders
95.5-04 Reg. Cab. Tacoma Rock Slider
HREW With Kickout
DOM With Kickout [+$70.00]
Add to Cart
Add to Wish List
Weld on Kit
Sold as a pair
Your choice of 1.75 x .120 HREW (softer less expensive) or DOM (30% stronger) certified round tube construction
2" Rear kickout helps protect fenders
Slider legs come pre-notched
Frame Plate / Gusset included to keep slider legs from denting the frame.
Ships bare steel, ready to paint with the coating and color of your choice. This kit requires welding, painting is not available.
For a look at the install process see the
Install Guide here
Watch the video below for a real world destructive test comparison of the three tubing options.
Check out our
tech article for science about the strength of the different materials
4x Innovations is proud to offer the highest value Rock Slider kits available! These heavy duty Rock Sliders are constructed from American made 1.75 x .120 DOM steel. This high grade steel makes every Rock Slider kit strong enough to take the full weight of your vehicle and can be used to pivot off of rocks and trees, squeeze through tight areas or just plain hammer on your truck in those jagged rocks all while protecting your truck's body. Hi-Lift style jacks can be used anywhere along the length of the slider to assist in recovery. The rear kick out adds a 2 inch bump out at the rear of the slider and provides much added protection to your rear wheel wells.
This weld on kit ships as a welded main outer slider (main straight tube, outer tube and connections stringers all welded). The legs, mounting plates and gussets are shipped separately so you can choose what angle to mount them. Included with your purchase is everything needed to solidly mount these sliders to your frame. Prenotched legs are provided unwelded to allow you to obtain that perfect custom fit you've been looking for. Weld on frame plates and gussets are provided for each leg to strengthen the frame-to-slider joint. The frame plate/gusset will also keep your slider from denting and damaging your frame when absorbing a hard hit.
95.5-04 Tacoma Rear Class 3 Hitch Bumper
95.5-04 Tacoma Tube Doors
Browse Similar Items
Shop by Model