Swing Out Tire Carrier Kit - Basic Swing only

Your Price: $425.00

Super Duty Swing Out Tire Carrier

Part Number: 1410100-Base

Lead time: 2-3 Days

Tire Mounting Plate *

No Plate Toyota 4wd - 6 on 5.5" circle Universal - see sizes below (+$6.00)

Tire Carrier Options

Make it a Driver's (Left) Side Swing Out (+$65.00) Add 2" Receiver Tube Bike Rack Mount (+$74.00) Add License plate mount and lights (+$30.00) Add License plate mount & lights & in tire studs (+$55.00)

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity

Description

4x Innovations has developed a new Swing Out Tire Carrier system that solves many problems seen on other types of carriers.

Main cross arm is 60 inches long, plus the hinge barrel. Longer lengths available as a WIY kit from here.
Industry's strongest hinge pivot mounted in double shear with high grade 5/16 steel support bracket
Supported by tapered roller bearings used on 1000 pound trailer axles, total rated load is 1250ft.lbs (IE 500lbs at 2.5ft from the hinge)
Massive 3/4 inch grade 8 pivot bolt
Stainless steel inner bearing sleeve to prevent corrosion
Spring loaded pin locks the hinge pivot open at 90 and 115 degrees
Spring pin rides on stainless steel skid pad, no scratches in the paint or corrosion
High strength latch uses 1" solid steel round bar catch pin and high grade steel components
Vibration proof design encloses around over 3/4 of latch pin
Spring pin locks latch closed and open
Nylon washer in latch components for wear resistance
UHMW skid pad for smooth, wear resistant closure
Choose between tire mounts with factory Toyota size lug nuts, 6 x 5.5 bolt pattern, or Universal Tire Mounting Plate (pattern info below).
Built standard to hold up to 36" tire with 6 7/16" inches from WMS to sidewall surface of tire
Optional license plate mount with license plate lights to mount license plate to main swing arm.
Optional license plate mount with plate lights and custom 4.5" lug studs to mount license plate in the center of spare tire.
Ships bare steel.
Tire Carrier install guide is available here
Tire Carrier accessory compatibility:
This listing does not have any provisions for additional accessories. The accessory hoop can be added if you wish to add your own accessories. If you wish to purchase accessories from us and have the tire carrier assembled for those accessories please see this listing: https://www.4xinnovations.com/product.asp?itemid=112

The universal tire mounting plate has the following lug mounting patterns:

5 x 4.5" uses 3 studs

5 x 5" uses 3 studs

5 x 5.5" uses 3 studs

6 x 6" uses 3 studs

8 x 6.5" uses 4 studs

8 x 170mm uses 4 studs

*This listing is for a tire carrier kit that is the tire carrier assembled and welded except the latch end plate (hinge barrel is tac welded to the main cross arm). When installing this kit you will need to provide sufficient mounting points for the hinge and latch catch stud. To finish out the carrier you will need to determine if the main tube being centered on the hinge pivot tube works for your application or if it needs to be offset, and then weld the main barrel. You'll also need to cut the main tube to length that is required for your application, weld the latch end plate to the end of the carrier.

If you order this product listing with a rear bumper, your tire carrier will NOT be assembled onto the bumper. You must order the tire carrier as a part of your bumper options on the bumper product page for the tire carrier to be fully assembled and aligned onto your bumper.

1.5x1.5x1/4 Gusset Package of 10

$18.00

In Stock Free Shipping

Add To Cart

4x4x1/4" Plate with 3/8" Holes

$3.22

In Stock

Add To Cart

1.5" Poly Spring Bushing Set

$9.00

In Stock

Add To Cart

Swing Out Tire Carrier Hinge Assembly

$154.00

In Stock Free Shipping

Select Options

Tire Carrier Hinge Stainless Skid Pad

$20.00

In Stock Free Shipping

Select Options

Tire Carrier Hinge Bearing and Seal Kit

$25.00

In Stock Free Shipping

Select Options

Swing Out Tire Carrier Kit - Basic Swing only

Choose Options

Related Items